Bell & Ross Goes Underwater With Their Latest Collection Of Square Dive Watches

Bell & Ross Goes Underwater With Their Latest Collection Of Square Dive Watches

Rolling in the deep.

As the saying goes: If it ain’t broke, don’t fix it. In the case of Bell & Ross, its decision to broaden its horizon to encompass more than just watches inspired by the gauges in the cockpit of aircrafts turned out to be a fantastic decision. From the skies, the brand planted its feet firmly on the ground for inspiration and, more recently, took to the seas, offering its first-ever square dive watch.

I have to reinforce the point of first ‘square’ dive watch because, as it turns out, Bell & Ross is no stranger when it comes to making dive watches. In fact, its very first dive watch predates the square BR 01 case by around eight years. In order to fully drive home the fact that dive watches had long been well within Bell & Ross’ portfolio, we were invited to Langkawi recently to witness the launch of its latest BR03-92 Diver Blue and Bronze watches.

From left: Hydromax, Diver 300 Classic, and the BR 02-92 Pro Dial

If, like me, you are relatively new to watches, it’s easy to pigeon-hole Bell & Ross firmly in the category of square, aviation-inspired watches; and this is because, for the past 10 years or so, these watches were pretty much the bestsellers of the brand and will probably remain so for the foreseeable future. However, in 1997, Bell & Ross actually produced its firstever dive watch – the Hydromax.

Far from just being just any old dive watch, this one actually broke a world record for water resistance, with the ability to withstand 1,110 bars of pressure. which translates to a depth of 11,100m. More interestingly, it managed to do this by filling the entire case with a patented transparent oil and even built in a patented caseback that could compensate for the expansion and contraction of this oil. Another cool side effect of oil filling the case was, because of the refractive index of oil, the Hydromax could be viewable from any angle underwater. Although a Hydromax in good condition is probably hard to come by these days, a good modern illustration of this unique refraction feature can still be experienced through an independent watch brand called Ressence.

Bell & Ross’ next dive watch was a little more modest, offering a 300m water resistance and a chronograph function. And, of course, it ticked all the boxes that enabled it to be called a dive watch, namely, the unidirectional bezel, a protected crown and screw-down tappets and back. Where the Diver 300 Classic was built to be more of a casual watch, the next dive offering, the BR02-92 Diver, brought the watch firmly back into the realms of professional use.

You can almost start to see the evolution of the watch into the square iteration of today. The case of the BR02-92 was slightly angular, while, on the ‘Pro Dial’, the indicators were designed purely with legibility in mind. And the water resistance? 1,000m.

2 of 2Next

BR03-92 DIVER BRONZE

The BR03-92 Diver Bronze is inspired by the diving helmets used during the early days of underwater exploration. The bronze case definitely gives the watch very warm and vintage look; and there is something quite emotional about bronze as, over time, the watch will develop its own unique patina, almost as if it is growing with you. The BR03-92 Diver Bronze is a limited edition collection of 999 pieces and will be paired with an aged leather and rubber strap options.

2 of 2Next

, , , ,

Type keyword(s) and press Enter